The APDTY 795125 parking assist sensor is a direct-replacement backup sensor designed for select 2006-2015 Volkswagen and 2008-2015 Audi models. This brand-new sensor replaces OE part number 1S0919275 and restores your vehicle's parking assist system, eliminating false warnings, beeping errors, and blind spots during reverse maneuvers.
Key Takeaways
- Direct replacement for OE part number 1S0919275 on select VW and Audi vehicles
- Restores parking assist/backup warning system functionality
- Compatible with select 2006-2015 Volkswagen and 2008-2015 Audi models—verify fitment using compatibility chart
- Brand-new sensor eliminates false alerts, constant beeping, and dead zones
- Plug-and-play installation in most applications
Buy APDTY 795125 directly from APDTY
What Does the APDTY 795125 Parking Assist Sensor Do?
The APDTY 795125 is a parking assist sensor (also called a backup sensor, park aid sensor, or reverse sensor) that uses ultrasonic technology to detect objects behind your vehicle during reverse maneuvers. Mounted in the rear bumper, this sensor sends distance data to your vehicle's parking assist module, which then alerts the driver with audible beeps or visual warnings on the dash or infotainment screen.
When the sensor functions correctly, it helps prevent collisions with obstacles, curbs, posts, and pedestrians during parking and low-speed reversing. The APDTY 795125 is a factory-equivalent replacement for OE part number 1S0919275, restoring full parking assist functionality when an original sensor has failed.
What Are the Symptoms of a Failed Parking Assist Sensor?
A faulty parking assist sensor typically produces one or more of the following symptoms:
- Constant beeping or chirping when shifting into reverse, even with no obstacles present
- No audible warning when approaching objects—"dead" sensor zones
- Parking assist warning light illuminated on the dash or error message on the infotainment display
- Intermittent or erratic alerts that do not correspond to actual object distance
- Physical damage to the sensor face from road debris, car wash brushes, or parking impacts
These issues commonly result from water intrusion, cracked sensor housings, internal circuit failure, or corrosion on the sensor connector. Replacing the failed sensor with the APDTY 795125 eliminates these faults and restores accurate object detection.
Which Vehicles Are Compatible With APDTY 795125?
The APDTY 795125 parking assist sensor is engineered for select 2006-2015 Volkswagen models and select 2008-2015 Audi models that originally equipped OE part number 1S0919275. Due to mid-year changes, trim-level variations, and regional differences, not all vehicles within these year ranges are compatible.
Always verify exact fitment using the live compatibility chart on the product page before ordering. The chart cross-references your vehicle's year, make, model, and submodel to confirm compatibility. Do not rely solely on year range—check the chart to ensure the APDTY 795125 matches your specific vehicle configuration.
| Make | Model Year Range | OE Part Number |
|---|---|---|
| Volkswagen | Select 2006-2015 Models | 1S0919275 |
| Audi | Select 2008-2015 Models | 1S0919275 |
Note: "Select models" means compatibility is limited to certain trims, engine options, or production dates. Use the compatibility chart to confirm your vehicle is supported.
APDTY 795125 Specifications and Features
| APDTY Part Number | 795125 |
| Replaces OE Part Number | 1S0919275 |
| Sensor Type | Ultrasonic Parking Assist / Backup Sensor |
| Condition | Brand New |
| Fitment Type | Direct Replacement (OE-equivalent) |
| Compatible Vehicle Makes | Select Volkswagen (2006-2015), Select Audi (2008-2015) |
| Mounting Location | Rear Bumper |
| Connector Type | OE-Style Plug (Vehicle-Specific) |
How Do You Install the APDTY 795125 Parking Assist Sensor?
Installation of the APDTY 795125 is straightforward for DIYers with basic hand tools and mechanical aptitude. The sensor is a plug-and-play replacement in most applications. General installation steps include:
- Locate the failed sensor in the rear bumper. It is typically a round plug flush-mounted in the bumper cover.
- Disconnect the vehicle battery (negative terminal) to prevent electrical issues during removal.
- Release the sensor connector from the wiring harness by pressing the locking tab and pulling gently.
- Twist or press the retaining tabs on the sensor body to release it from the bumper. Some sensors twist counterclockwise; others have squeeze-tabs.
- Remove the old sensor and inspect the mounting hole for cracks or debris.
- Insert the new APDTY 795125 sensor into the bumper hole, aligning any indexing tabs, and twist or press until it locks securely.
- Reconnect the wiring harness to the new sensor until the connector clicks into place.
- Reconnect the battery and test the parking assist system by shifting into reverse and approaching an object.
Safety Reminder: Always work with the ignition off and battery disconnected when servicing electrical components. If your vehicle requires bumper removal for sensor access, consult a factory service manual or professional technician for proper procedures and torque specifications.
After installation, some vehicles may require a parking assist system recalibration or fault code clearing using a diagnostic scan tool. If warning lights persist after sensor replacement, have the system scanned to ensure no additional faults are present.
Frequently asked questions
Does the APDTY 795125 fit all 2006-2015 Volkswagen and 2008-2015 Audi vehicles?
No. The APDTY 795125 is compatible with select models only within those year ranges. Always verify fitment using the live compatibility chart on the product page before ordering, as not all trims or engine configurations are compatible.
What OE part number does the APDTY 795125 replace?
The APDTY 795125 directly replaces OE part number 1S0919275, used in select Volkswagen and Audi rear parking assist systems.
Will I need to reprogram or calibrate the sensor after installation?
Most vehicles recognize the new sensor automatically once installed. However, some models may require a scan tool to clear stored fault codes or perform a parking assist recalibration. Consult your vehicle's service manual or a professional technician if warning lights remain after installation.
Can I install the APDTY 795125 myself, or do I need a mechanic?
Installation is DIY-friendly for most vehicle owners with basic hand tools. The sensor is typically a plug-and-play part requiring no special tools or programming. If your vehicle requires bumper removal for access, consider professional installation to ensure proper reassembly and alignment.
The APDTY 795125 parking assist sensor is the cost-effective, factory-equivalent solution for restoring backup warning system functionality on select 2006-2015 Volkswagen and 2008-2015 Audi vehicles. Replacing OE part number 1S0919275, this brand-new sensor eliminates false alerts, dead zones, and parking assist error messages. Always verify exact vehicle compatibility using the live chart on the product page, and follow proper installation and safety procedures for reliable, long-lasting performance. Restore your peace of mind and parking precision—order the APDTY 795125 today.