APDTY 67878 is a heated side view mirror replacement glass designed for the right (passenger-side) of 2003-2006 Mitsubishi Outlander vehicles equipped with heated mirrors. This direct-fit replacement solves cracked, broken, or missing mirror glass issues and restores full visibility, replacing OEM part number 7632A222 with integrated plastic backing for secure installation.
Key Takeaways
- Direct replacement for right passenger-side mirror glass on 2003-2006 Mitsubishi Outlander models with heated mirrors
- Includes integrated plastic backing plate for secure attachment to existing mirror assembly
- Features built-in heating element to prevent ice and fog buildup in cold weather
- Replaces OEM Mitsubishi part number 7632A222
- Glass-only replacement—no need to replace entire mirror assembly
Buy APDTY 67878 directly from APDTY
What Does the APDTY 67878 Mirror Glass Replace?
The APDTY 67878 replaces the right (passenger-side) heated mirror glass on 2003-2006 Mitsubishi Outlander vehicles. This component is the actual reflective glass surface you see when looking at your side mirror, complete with the plastic backing plate that attaches to your existing mirror motor assembly.
When mirror glass cracks, shatters, or falls off due to road debris, weather damage, or adhesive failure, you don't need to replace the entire expensive mirror assembly. The 67878 provides just the glass and backing plate, allowing you to restore mirror function at a fraction of the cost of a complete mirror replacement.
This part directly replaces Mitsubishi OEM part number 7632A222 and is designed specifically for vehicles equipped with the factory heated mirror option.
What Vehicles Does APDTY 67878 Fit?
Based on verified fitment data, the APDTY 67878 is compatible with:
- 2003 Mitsubishi Outlander (passenger-side, heated mirror equipped)
- 2004 Mitsubishi Outlander (passenger-side, heated mirror equipped)
- 2005 Mitsubishi Outlander (passenger-side, heated mirror equipped)
- 2006 Mitsubishi Outlander (passenger-side, heated mirror equipped)
Important: This glass is designed for the right (passenger) side only and is only compatible with vehicles that have the heated mirror option. Not all Outlander models in these years came with heated mirrors as standard equipment. Verify your vehicle has heated mirrors before ordering by checking if your mirror glass defogs when you use the rear window defroster button.
For additional year/model compatibility or if you're unsure about your specific vehicle, check the live compatibility chart on the product page at autopartsdirecttoyou.com.
What Are the Symptoms of Damaged Mirror Glass?
You need a mirror glass replacement when you experience:
- Cracked or shattered glass from impact with rocks, debris, or other vehicles
- Missing mirror glass that has completely fallen off due to adhesive failure
- Distorted reflection from severe scratching or surface damage
- Water intrusion behind the glass causing fogging or discoloration
- Non-functional heating element where the mirror no longer defrosts (though sometimes this indicates wiring issues rather than glass failure)
- Loose or vibrating glass that rattles or shifts in the backing
Driving with damaged mirror glass creates a serious safety hazard by eliminating critical blind-spot visibility. Most states require functional side mirrors to pass vehicle inspection and for legal road use.
APDTY 67878 Specifications and Features
| Specification | Detail |
|---|---|
| APDTY Part Number | 67878 |
| Replaces OEM Number | 7632A222 |
| Position | Right (Passenger-Side) |
| Heating Element | Yes - Integrated heated glass |
| Backing Plate | Included - Plastic mounting plate |
| Glass Type | Convex (wide-angle view) |
| Compatible Years | 2003, 2004, 2005, 2006 |
| Compatible Make/Model | Mitsubishi Outlander |
| Heated Mirror Requirement | Vehicle must have factory heated mirror option |
The integrated plastic backing plate ensures the glass mounts securely to your existing mirror motor and adjustment mechanism. The heating element connects to your vehicle's existing mirror heater wiring for plug-and-play functionality.
How Do You Install Mirror Glass Replacement?
Mirror glass replacement is a straightforward DIY repair for most vehicle owners. General installation overview:
- Remove old glass: Carefully pry off remaining old glass and backing plate from the mirror motor assembly. Some adhesive or clips may need to be released.
- Disconnect heater wire: Unplug the electrical connector for the heating element (usually a small two-wire connector behind the backing plate).
- Clean mounting surface: Remove all old adhesive, glass fragments, and debris from the mirror motor mounting area.
- Connect new heater wire: Plug the heating element connector on the new APDTY 67878 glass into your vehicle's mirror heater harness.
- Position new glass: Align the backing plate with the mirror motor mounting points and apply firm pressure to seat any clips or adhesive.
- Test operation: Verify the mirror adjusts properly using interior controls and that the heating function works with the rear defroster.
Safety note: Work carefully with mirror glass to avoid cuts. Wear safety glasses and gloves when removing shattered glass. Some mirror assemblies use strong adhesive that may require heat application or specific release tools—consult a vehicle-specific repair manual for detailed procedures for your Outlander model year.
If you're uncomfortable working with glass or electrical connections, professional installation at a repair shop typically takes 15-30 minutes.
Frequently asked questions
Is APDTY 67878 for the driver side or passenger side?
The APDTY 67878 is for the right (passenger-side) mirror only. If you need the driver-side mirror glass, you'll need a different part number.
Will this work on my Outlander if it doesn't have heated mirrors?
No. The APDTY 67878 is designed specifically for Mitsubishi Outlander models equipped with factory heated mirrors. If your vehicle does not have heated mirrors, you'll need a non-heated glass version.
Do I need to replace the entire mirror assembly or just the glass?
Just the glass. The APDTY 67878 includes the mirror glass and backing plate, allowing you to keep your existing mirror housing, motor, and adjustment mechanism, saving significant cost versus full assembly replacement.
How do I know if my Outlander has heated mirrors?
Turn on your rear window defroster and wait a few minutes. If your side mirrors warm up and clear fog or frost, you have heated mirrors. You can also check your original equipment—heated mirrors typically have a small wire connector visible behind the glass backing.
The APDTY 67878 heated mirror glass delivers an affordable, direct-fit solution for restoring passenger-side mirror visibility on 2003-2006 Mitsubishi Outlander vehicles. With integrated heating functionality and included backing plate, this replacement eliminates the need for costly complete mirror assembly replacement. Whether you're dealing with cracked glass from road debris or a mirror that's fallen off, the 67878 restores safe blind-spot visibility and passes inspection requirements. Verify your vehicle's heated mirror equipment and order the APDTY 67878 for reliable mirror repair backed by quality replacement parts.