The APDTY 67817 side view mirror replacement glass is a direct-fit solution for 2007-2009 Kia Sorento models equipped with power, non-heated mirrors on the driver side. This replacement glass with plastic backing plate restores full mirror function after damage from road debris, vandalism, or parking incidents, replacing OE part number 876033E550 without requiring a complete mirror assembly replacement.
Key Takeaways
- Direct replacement for driver-side mirror glass on 2007-2009 Kia Sorento with power, non-heated mirrors
- Includes plastic backing plate for secure mounting to existing mirror mechanism
- Replaces OE Kia part number 876033E550 at a fraction of full assembly cost
- Compatible ONLY with non-heated power mirror configurations—verify your vehicle specs before ordering
- Simple installation restores visibility and maintains vehicle safety compliance
Buy APDTY 67817 directly from APDTY
What Is the APDTY 67817 Mirror Glass and What Does It Replace?
The APDTY 67817 is a replacement mirror glass assembly for the driver-side (left) exterior mirror on 2007-2009 Kia Sorento vehicles. Unlike a complete mirror assembly replacement that includes the housing, motor, and all internal components, this product provides just the glass element with its attached plastic backing plate—the most commonly damaged part of the mirror assembly.
This glass replaces Kia OE part number 876033E550 and is designed specifically for Sorento models equipped with power, non-heated mirrors. The power adjustment feature means your mirror position is controlled electronically from inside the cabin, but these particular mirror configurations do not include heating elements to melt ice and snow.
When only the glass is cracked, shattered, or missing, replacing just this component saves the considerable expense of a full mirror assembly while restoring complete rear-view visibility. The plastic backing plate ensures proper fitment to the existing adjustment mechanism within your mirror housing.
What Are the Signs Your Kia Sorento Mirror Glass Needs Replacement?
Several obvious symptoms indicate it's time to replace your driver-side mirror glass:
- Cracked or shattered glass: Impact from rocks, road debris, or door strikes creates visible damage that distorts your view and may allow moisture into the mirror housing
- Missing glass: Complete detachment leaves only the backing plate or empty housing, eliminating your ability to monitor the driver-side blind spot
- Loose or rattling glass: When the adhesive bond fails or the backing plate cracks, the glass moves independently from the adjustment mechanism, preventing proper positioning
- Clouded or delaminated surface: While less dramatic than breakage, severe deterioration of the reflective coating creates blind spots and reduces visibility in critical driving situations
Operating a vehicle with damaged or missing mirror glass creates serious safety risks and may violate state vehicle equipment laws. Most jurisdictions require functional mirrors on both sides of the vehicle, making prompt replacement essential for legal operation and insurance compliance.
Which Kia Sorento Models Are Compatible With APDTY 67817?
According to the verified fitment data for this product, the APDTY 67817 mirror glass is compatible with:
| Year | Make | Model | Mirror Type | Side |
|---|---|---|---|---|
| 2007 | Kia | Sorento | Power, Non-Heated | Left (Driver) |
| 2008 | Kia | Sorento | Power, Non-Heated | Left (Driver) |
| 2009 | Kia | Sorento | Power, Non-Heated | Left (Driver) |
Critical compatibility note: This glass fits ONLY Sorento models with power adjustment but WITHOUT heating elements. Kia offered multiple mirror configurations during these model years, including manual adjustment mirrors, heated power mirrors, and power mirrors with turn signal indicators. This specific part number is engineered for the non-heated power mirror configuration exclusively.
Before ordering, verify your vehicle's mirror type by checking:
- Your owner's manual for listed equipment
- The original Kia window sticker or build sheet
- The presence or absence of a heating grid pattern on your existing mirror glass
- Your mirror control switch—heated mirrors typically have a separate defrost button
If your research indicates a different mirror configuration, this part will not fit correctly. Check the APDTY website compatibility chart for your specific vehicle to confirm fitment before purchase.
APDTY 67817 Specifications and Features
Understanding the specifications ensures this replacement glass meets your repair needs:
| Specification | Details |
|---|---|
| APDTY Part Number | 67817 |
| Replaces OE Number | 876033E550 |
| Vehicle Position | Left (Driver Side) |
| Mirror Function | Power Adjustment, Non-Heated |
| Included Components | Mirror glass with attached plastic backing plate |
| Glass Type | Flat (non-convex) mirror surface |
| Fitment Years | 2007, 2008, 2009 Kia Sorento |
| Condition | Brand New |
The plastic backing plate is pre-attached to the glass, maintaining the correct positioning and providing the mounting interface that clips or bonds to your existing mirror adjustment mechanism. This design allows the power adjustment motors in your mirror housing to continue functioning normally once the new glass is installed.
How to Install Mirror Glass on 2007-2009 Kia Sorento
Replacing side view mirror glass is a straightforward repair that most DIYers can complete in 15-30 minutes with basic tools. The general process involves:
- Remove damaged glass: Carefully pry away any remaining glass fragments from the mirror housing. Wear safety glasses and gloves to protect against sharp edges. If the backing plate is still attached to the adjustment mechanism, note how it clips or adheres before removal.
- Clean the mounting surface: Remove all old adhesive, glass fragments, and debris from the adjustment plate inside the mirror housing. The mounting surface must be clean and dry for proper adhesion of the new glass.
- Position new glass: Align the plastic backing plate on the APDTY 67817 with the adjustment mechanism in your mirror housing. Some mirrors use clips that snap into place; others require adhesive bonding. Follow the attachment method used by your original glass.
- Secure and test: If using adhesive, apply even pressure for the recommended curing time. Once secured, test the power adjustment function to ensure the glass moves correctly through all positions. Adjust the mirror to your normal driving position.
Safety consideration: Always perform this work in a safe location away from traffic. If your mirror was damaged in a collision, inspect the entire mirror assembly and mounting bracket for hidden damage that might compromise structural integrity. If the mirror housing, adjustment mechanism, or door mounting points show damage, a complete mirror assembly replacement may be necessary for safe operation.
Some adhesive-mount mirrors benefit from allowing cure time before driving—check any included installation instructions for specific recommendations. Proper installation ensures the mirror remains securely attached during normal driving conditions and vibration.
Why Replace Just the Glass Instead of the Complete Mirror Assembly?
When only the glass is damaged, replacing just this component offers several practical advantages:
- Significant cost savings: Mirror glass costs a fraction of a complete assembly with housing, motors, wiring, and mounting hardware
- Faster repair: Glass replacement takes minutes compared to the door panel removal, connector disconnection, and mounting bolt access required for full assembly replacement
- Preserves factory finish: Your original mirror housing maintains its factory paint match and condition—no need to worry about color-matching replacement housings
- Retains calibrated adjustment: Your mirror's power adjustment mechanism stays in its calibrated position, eliminating the need to re-aim or adjust the assembly after installation
- Environmentally responsible: Replacing only the damaged component reduces waste compared to discarding a full assembly when most components remain functional
Full assembly replacement becomes necessary only when the housing is cracked, the adjustment mechanism has failed, wiring is damaged, or mounting points are broken. For typical glass damage from rocks, parking impacts, or vandalism, glass-only replacement is the most cost-effective and practical solution.
Frequently asked questions
Will APDTY 67817 work on the passenger side or on heated mirrors?
No. This glass is specifically engineered for the driver (left) side only and fits non-heated power mirror configurations exclusively. Passenger-side glass and heated mirror glass require different part numbers with different specifications.
How do I know if my Kia Sorento has heated or non-heated mirrors?
Check for a heating grid pattern on your existing mirror glass, or look for a dedicated mirror defrost button on your control switch. Heated mirrors also typically appear on your vehicle's option list or window sticker. If in doubt, verify with the APDTY compatibility chart before ordering.
Does this replacement glass come with adhesive or clips?
The glass includes the pre-attached plastic backing plate that mounts to your mirror's adjustment mechanism. Depending on your specific mirror design, you may need to use the existing clips or apply appropriate automotive mirror adhesive—check your original glass attachment method before beginning installation.
What is OE part number 876033E550?
876033E550 is the original equipment (OE) Kia part number for this driver-side mirror glass. The APDTY 67817 is manufactured to replace this OE component, providing equivalent fit and function at aftermarket pricing.
The APDTY 67817 side view mirror glass provides Kia Sorento owners with an economical, direct-fit solution for restoring driver-side visibility after mirror damage. By replacing only the damaged glass component rather than the entire mirror assembly, you save time and money while maintaining your vehicle's original factory equipment. Verify your 2007-2009 Sorento has power, non-heated mirrors before ordering, and consult the APDTY compatibility chart if you have any fitment questions. Restore your critical blind-spot visibility and return to safe, legal driving with this precision-manufactured replacement glass.