The APDTY 67800 side view mirror replacement glass is a direct-fit heated mirror glass designed specifically for the right (passenger-side) position on 2002-2005 Suzuki Grand Vitara models. This OE-replacement part solves the common problem of cracked, broken, or missing mirror glass, restoring full visibility and heated defrost functionality while replacing OE part number 8472066D51.
Key Takeaways
- Direct replacement for right (passenger-side) heated mirror glass on 2002-2005 Suzuki Grand Vitara
- Replaces OE Suzuki part number 8472066D51
- Includes integrated heating element to prevent fog and ice buildup
- Restores safe visibility without replacing the entire mirror assembly
- Brand new glass, not refurbished or used
Buy APDTY 67800 directly from APDTY
What Does the APDTY 67800 Mirror Glass Replace?
The APDTY 67800 is the mirror glass insert that fits into the existing mirror housing on the right (passenger) side of your 2002-2005 Suzuki Grand Vitara. When your original mirror glass is cracked, shattered, or has detached from the backing plate, this replacement glass restores your side visibility without the expense of replacing the entire mirror assembly.
This part directly replaces Suzuki OE part number 8472066D51 and includes the integrated heating element that connects to your vehicle's existing heated mirror circuit. The glass itself is the component you see and adjust for visibility, mounted to a backing plate that clips or adheres into the mirror housing.
What Are the Signs You Need Replacement Mirror Glass?
Several clear symptoms indicate your passenger-side mirror glass needs replacement:
- Cracked or shattered glass: Impact from road debris, car wash equipment, or minor collisions can crack the mirror surface, distorting your view and creating safety hazards.
- Glass detached from backing: The adhesive bond between glass and backing plate can fail over time due to temperature cycling and vibration, causing the glass to rattle or fall out completely.
- Non-functional heating: If your driver-side heated mirror works but the passenger side stays fogged or iced, the heating element in the glass may be damaged.
- Missing glass: Complete loss of the glass insert leaves you with no passenger-side visibility and an exposed mirror housing.
- Discoloration or hazing: Severe weathering, delamination of the mirror coating, or chemical damage can make the glass unusable.
Any of these conditions compromise your ability to safely change lanes, merge, or back up, making prompt replacement essential for safe driving.
Which Vehicles Does the APDTY 67800 Fit?
According to the verified fitment data for APDTY part number 67800, this heated mirror glass is compatible with:
| Year | Make | Model | Position |
|---|---|---|---|
| 2002 | Suzuki | Grand Vitara | Right (Passenger-Side) |
| 2003 | Suzuki | Grand Vitara | Right (Passenger-Side) |
| 2004 | Suzuki | Grand Vitara | Right (Passenger-Side) |
| 2005 | Suzuki | Grand Vitara | Right (Passenger-Side) |
Important: This part is designed for the right (passenger-side) mirror only on these specific model years. If you need the left (driver-side) glass, you will need a different part number. Always verify fitment against your vehicle's year, make, and model before ordering. If you have a model year outside this range or a different Suzuki model, check the live compatibility chart on the product page to confirm fit.
What Are the Specifications of This Mirror Glass?
| Specification | Detail |
|---|---|
| APDTY Part Number | 67800 |
| Part Type | Side View Mirror Replacement Glass |
| Position | Right (Passenger-Side) |
| Heated | Yes (integrated heating element) |
| OE Replacement Number | 8472066D51 |
| Compatibility | 2002-2005 Suzuki Grand Vitara |
| Condition | Brand New |
| Includes | Mirror glass with backing plate and heating element |
The heated feature is designed to work with the vehicle's existing heated mirror system. When you activate your rear defroster or heated mirror switch (depending on your vehicle's wiring), the heating element warms the glass surface to melt ice and prevent fog buildup in cold or humid conditions.
How Is Mirror Glass Replacement Performed?
Replacing side view mirror glass is a straightforward repair that most DIY mechanics can complete in 15-30 minutes with basic tools. The general procedure involves:
- Preparation: Park on a level surface and ensure the mirror is in a comfortable working position. Wear safety glasses and work gloves to protect against sharp edges.
- Remove old glass: If the glass is cracked but still attached, carefully pry it away from the backing plate using a trim removal tool or flat plastic wedge. If your mirror uses clips, gently release them by applying pressure to the back of the mirror housing. If adhesive-mounted, you may need to apply heat with a hair dryer to soften the adhesive bond. Remove all old adhesive residue from the mirror housing.
- Disconnect heating element: The heating element will have a small electrical connector behind the mirror housing. Carefully disconnect this plug, noting its orientation for reinstallation.
- Install new glass: Connect the heating element connector to the back of the new APDTY 67800 mirror glass. Align the glass with the mounting points or adhesive surface in the housing. If your mirror uses clips, press firmly until you hear or feel them snap into place. If adhesive-mounted, apply even pressure for 30-60 seconds to ensure proper bonding.
- Test operation: Turn on the ignition and activate the heated mirror function to verify the heating element is working. Adjust the mirror using the power controls to confirm the adjustment mechanism engages properly with the new glass.
Safety Note: Mirror glass edges are extremely sharp. Always wear protective gloves when handling broken or new mirror glass. If removing shattered glass, consider taping over cracks before removal to prevent fragments from falling. Dispose of broken glass safely in a puncture-resistant container.
Some mirror housings may have unique mounting methods. If you encounter resistance or unclear mounting points, consult your vehicle's service manual for model-specific instructions. The goal is secure attachment without over-stressing the glass or housing.
Why Choose APDTY 67800 Over OE or Other Aftermarket Options?
The APDTY 67800 offers several advantages for Suzuki Grand Vitara owners:
- Cost-effective repair: Replacing just the glass insert costs a fraction of purchasing an entire new mirror assembly, which can run hundreds of dollars from the dealer.
- OE-equivalent quality: This replacement glass is manufactured to meet or exceed original equipment specifications, with proper curvature, heating element output, and mounting design.
- Heated functionality: Unlike some budget glass replacements that omit the heating element, the APDTY 67800 includes the integrated heater to maintain defrost capability in winter conditions.
- Brand new condition: This is not salvage yard glass or a refurbished part—you receive new glass with full heating function and clear optical quality.
- Direct fit: The backing plate and mounting design match the OE configuration for your 2002-2005 Grand Vitara, ensuring secure attachment without modification.
When visibility and safety are concerned, choosing a quality replacement with proper fit and full functionality is essential. The APDTY 67800 delivers OE-replacement performance at an aftermarket value.
Frequently asked questions
Is the APDTY 67800 for the driver side or passenger side?
The APDTY 67800 is designed for the right (passenger-side) mirror position only on 2002-2005 Suzuki Grand Vitara vehicles. If you need the left (driver-side) glass, you will need a different part number.
Does this mirror glass include the heating element?
Yes, the APDTY 67800 includes an integrated heating element that connects to your Grand Vitara's existing heated mirror circuit to prevent fog and ice buildup.
Will this fit my 2006 or newer Suzuki Grand Vitara?
The verified fitment data for APDTY 67800 covers only 2002-2005 Suzuki Grand Vitara models. For 2006 or newer model years, check the live compatibility chart on the product page or contact customer service to confirm the correct part number for your vehicle.
Do I need to replace the entire mirror assembly or just the glass?
If only your mirror glass is damaged and the housing, adjustment mechanism, and mounting hardware are intact, you can replace just the glass insert using the APDTY 67800. This saves considerable cost versus replacing the entire mirror assembly.
The APDTY 67800 heated mirror glass provides a cost-effective, direct-fit solution to restore passenger-side visibility on your 2002-2005 Suzuki Grand Vitara. With integrated heating functionality and OE-equivalent quality, this replacement glass delivers the performance and safety you need without the expense of a complete mirror assembly replacement. Whether your original glass is cracked, detached, or missing entirely, the APDTY 67800 offers a straightforward repair that returns your vehicle to safe operating condition. Verify your vehicle's year and model against the compatibility chart, and restore full mirror function today.