APDTY 67629 is a brand-new replacement side view mirror glass designed for the left (driver-side) manual-adjust exterior mirror on 2000-2004 Nissan Xterra SE models. This direct-fit glass assembly includes a plastic backing plate and replaces Nissan OEM part number 96302-3S510, restoring full mirror visibility after breakage or damage.
Key Takeaways
- Direct replacement for 2000-2004 Nissan Xterra SE driver-side manual mirrors
- Includes plastic backing plate for secure installation
- Replaces Nissan OEM 96302-3S510
- Manual-adjust glass only, not compatible with power-adjust mirrors
- Installation instructions included for straightforward DIY replacement
Buy APDTY 67629 directly from APDTY
What Does the APDTY 67629 Mirror Glass Replace?
The APDTY 67629 is a replacement side view mirror glass assembly for the left (driver) side manual-adjust mirror on 2000-2004 Nissan Xterra SE models. The glass mounts onto the existing mirror housing and pivoting mechanism via a plastic backing plate, identical to the original factory design.
This part replaces Nissan OEM part number 96302-3S510, which is the factory mirror glass supplied by Nissan for manual-adjust mirrors on these model years. When the glass cracks, shatters, or falls off the backing plate, this assembly restores full rearward visibility without requiring replacement of the entire mirror housing.
Note: This glass is designed specifically for manual-adjust mirrors (crank or cable-adjust). It is not compatible with power-adjust or heated mirror assemblies.
Which Vehicles Are Compatible with APDTY 67629?
According to verified fitment data, APDTY 67629 is compatible with:
- 2000 Nissan Xterra SE (driver-side, manual-adjust)
- 2001 Nissan Xterra SE (driver-side, manual-adjust)
- 2002 Nissan Xterra SE (driver-side, manual-adjust)
- 2003 Nissan Xterra SE (driver-side, manual-adjust)
- 2004 Nissan Xterra SE (driver-side, manual-adjust)
Important: This glass is confirmed for the SE trim level only and is designed for manual-adjust mirrors. If your Xterra has power-adjust or heated mirrors, or if you own a different trim level (XE, SC, etc.), verify compatibility before ordering. Always cross-reference your vehicle's VIN or OEM part number (96302-3S510) to confirm fit.
What Are the Symptoms of Broken Mirror Glass?
A damaged or missing driver-side mirror glass creates several safety and legal issues:
- No rearward visibility on the driver side: You cannot safely monitor traffic, pedestrians, or obstacles in the left blind zone.
- Cracked or shattered glass: Even a small crack can distort the reflected image, making lane changes and merging dangerous.
- Glass falling off the backing: The adhesive bond may fail over time, causing the glass to detach completely from the mirror housing.
- Failed vehicle inspection: Many states require functional mirrors on both sides; a broken driver mirror can result in inspection failure.
- Increased accident risk: Without a clear view of the left lane, you cannot safely change lanes or parallel park.
Replacing the mirror glass promptly restores full visibility and helps you meet legal mirror requirements in most jurisdictions.
APDTY 67629 Specifications and Contents
| Specification | Detail |
|---|---|
| Part Number | APDTY 67629 |
| Replaces OEM | Nissan 96302-3S510 |
| Side | Left (Driver) |
| Mirror Type | Manual Adjust (Non-Powered) |
| Backing Material | Plastic |
| Fitment | 2000-2004 Nissan Xterra SE |
| Included | Installation instructions |
| Condition | Brand New |
The assembly arrives ready to install, with the glass pre-bonded to the plastic backing plate. You do not need to source adhesive separately.
How to Replace Mirror Glass on a Nissan Xterra
Replacing the mirror glass on a 2000-2004 Nissan Xterra SE is a straightforward DIY repair. Follow the included installation instructions and use these general steps as a guide:
- Gather tools: You typically need a flat-blade screwdriver or plastic trim tool, safety glasses, and gloves (to protect against broken glass).
- Remove the old glass: Carefully pry the broken glass away from the mirror housing. If the glass is shattered, remove all fragments. The backing plate may be held by clips or adhesive; work slowly to avoid cracking the housing.
- Clean the mounting surface: Remove any old adhesive residue or glass fragments from the mirror mechanism. Wipe the surface with isopropyl alcohol and let it dry.
- Position the new glass: Align the APDTY 67629 glass assembly with the mounting points on the mirror mechanism. The plastic backing plate has tabs or clips that mate with corresponding slots in the housing.
- Secure the glass: Press firmly until you hear or feel the clips snap into place. Some mirrors use adhesive pads; in that case, peel the protective film and press the glass onto the mounting surface for 30 seconds.
- Test the mirror: Verify that the glass is securely attached and that the manual adjustment mechanism still pivots smoothly.
Safety tip: Wear safety glasses and gloves when handling broken glass. Dispose of old glass fragments in a sealed container or wrapped in newspaper to prevent injury.
Always refer to the included installation instructions for model-specific details.
Why Choose APDTY 67629 Over OEM or Other Aftermarket Options?
APDTY 67629 offers several advantages for Nissan Xterra owners:
- Direct OEM replacement design: Mirrors the exact dimensions and backing-plate configuration of Nissan 96302-3S510, ensuring proper fit and clip engagement.
- Includes installation instructions: Step-by-step guidance reduces guesswork and speeds up the repair.
- Ready to install: Glass is pre-attached to the backing plate; no messy adhesive kits required.
- Cost-effective solution: Replaces only the damaged glass, not the entire mirror assembly, saving you money and installation time.
- Brand-new condition: Factory-fresh glass with no scratches, hazing, or previous damage.
Whether you are a DIY home mechanic or a professional repair shop, the APDTY 67629 delivers a reliable, plug-and-play solution for manual-adjust Xterra mirrors.
Frequently asked questions
Is APDTY 67629 compatible with power-adjust or heated mirrors?
No. APDTY 67629 is designed exclusively for manual-adjust mirrors on 2000-2004 Nissan Xterra SE models. It does not include heating elements or power-adjustment connectors and will not fit power or heated mirror assemblies.
Can I use this glass on the passenger (right) side mirror?
No. APDTY 67629 is a left (driver-side) mirror glass. The backing-plate shape and mounting points differ between left and right mirrors, so you must order the correct side-specific part.
Do I need to replace the entire mirror housing, or just the glass?
In most cases, you only need to replace the glass. If the mirror housing, pivoting mechanism, or adjustment cable is damaged, you may need a complete mirror assembly. APDTY 67629 is ideal when only the glass is broken or missing.
Will this glass work on other Nissan models or Xterra trim levels?
The verified fitment for APDTY 67629 is 2000-2004 Nissan Xterra SE manual-adjust mirrors only. If you own a different trim (XE, SC, etc.) or another Nissan model, confirm OEM part number compatibility (96302-3S510) or check with APDTY support before ordering.
A broken or missing driver-side mirror glass compromises safety and may lead to traffic citations or failed inspections. APDTY 67629 restores full rearward visibility on 2000-2004 Nissan Xterra SE models with manual-adjust mirrors, replacing OEM part 96302-3S510 at a fraction of the cost of a complete mirror assembly. With included installation instructions and a pre-attached plastic backing, this direct-fit glass is ready for straightforward DIY installation. Verify your vehicle's trim level and mirror type, then order APDTY 67629 to complete your repair with confidence.