The APDTY 170250 shifter repair kit provides a direct replacement solution for broken or damaged automatic transmission shifter buttons on 2003-2005 Honda Accord vehicles. This three-piece kit includes the upper plastic bezel, chrome shift button, and return spring—everything needed to restore proper shifter operation when the factory button assembly fails or breaks.
Key Takeaways
- Complete three-piece kit: upper bezel, chrome shift button, and spring
- Direct replacement for OE part number 54141-SDA-A81
- Fits 2003-2005 Honda Accord with automatic transmission only
- Repairs common failure where shift button breaks or bezel cracks
- Restores proper shifter lock release function
Buy APDTY 170250 directly from APDTY
What Does the APDTY 170250 Shifter Button Kit Fix?
This shifter repair kit addresses a common failure point in 2003-2005 Honda Accord automatic transmission shifters: the plastic shift button assembly that releases the shifter from Park. When you press the button on your shift knob, it disengages the shift lock mechanism, allowing you to move the gear selector out of Park.
Over time and repeated use, the plastic bezel can crack, the button itself can break, or the internal spring can weaken or fall out. When any of these components fail, you may experience difficulty shifting out of Park, a stuck shift button, or a button that no longer returns to its normal position after pressing.
The APDTY 170250 kit replaces all three wear components simultaneously, ensuring a complete repair rather than attempting to replace individual pieces.
What Vehicles Does the APDTY 170250 Fit?
According to the verified product data, this shifter button repair kit is compatible with:
- 2003 Honda Accord (Automatic Transmission)
- 2004 Honda Accord (Automatic Transmission)
- 2005 Honda Accord (Automatic Transmission)
Important: This kit fits automatic transmission models only. It will not work on manual transmission Accords. Always verify your specific vehicle year, make, and model using the compatibility chart on the product page before ordering, as variations in trim levels or production dates may affect fitment.
What Symptoms Indicate You Need This Repair Kit?
Several clear symptoms indicate that your Honda Accord's shifter button assembly needs replacement:
- Broken or cracked shift button: Visible damage to the chrome button or the plastic bezel surrounding it
- Button doesn't return: The shift button stays depressed after you release it instead of popping back up
- Difficult to shift out of Park: You have to press extremely hard on the button or wiggle it to release the shifter
- Button feels loose or wobbly: The button moves side-to-side or doesn't feel secure when pressed
- Missing spring: The button fell out or you can see the internal spring is missing or damaged
- Bezel separation: The upper plastic bezel piece has cracked away from the shifter handle
Any of these symptoms indicate worn or broken components that the APDTY 170250 kit is designed to replace.
What's Included in the APDTY 170250 Kit?
This is a complete three-component repair kit that replaces all the wear items in the shifter button assembly:
| Component | Description | Function |
|---|---|---|
| Upper Plastic Bezel | Trim ring that holds button assembly | Secures button to shifter handle, provides finished appearance |
| Chrome Shift Button | Press-button shifter release | Actuates shift lock release when depressed |
| Return Spring | Internal coil spring | Returns button to raised position after release |
OE Replacement Part Number: 54141-SDA-A81 / 54141SDAA81
By replacing all three components together, you ensure that every wear point is addressed, preventing premature failure of individual pieces and avoiding the need to repeat the repair.
How Do You Install the Shifter Button Repair Kit?
While specific installation steps vary by exact shifter design, the general process for replacing the shifter button assembly on 2003-2005 Honda Accord models follows these steps:
- Access the assembly: Some shifter designs allow access from the top, while others may require removing the lower portion of the shift knob or trim
- Remove old components: Carefully extract the damaged button, bezel, and spring from the shifter handle
- Clean the cavity: Remove any debris or broken plastic pieces from inside the shifter handle
- Install the spring: Place the new return spring in the correct position within the shifter mechanism
- Insert the button: Install the new chrome button, ensuring it aligns properly with the spring
- Secure the bezel: Snap the upper plastic bezel into place around the button assembly, verifying it locks securely
- Test operation: Press the button repeatedly to confirm smooth operation and proper return action
Safety Note: Perform this repair with the vehicle in Park, parking brake engaged, and on level ground. Test the repair thoroughly before driving to ensure the shift lock mechanism operates correctly.
This repair typically requires no special tools and can be completed in 15-30 minutes by most DIY vehicle owners. If you encounter difficulty accessing the button assembly or are unsure about any step, consult a professional technician or your vehicle's service manual for detailed instructions specific to your Accord model.
Frequently asked questions
Will this kit work on manual transmission Honda Accords?
No, the APDTY 170250 kit is designed specifically for automatic transmission models only. Manual transmission shifters use a completely different design and require different parts.
Can I replace just the button without the bezel and spring?
While you might be able to reuse some components if they're undamaged, replacing all three pieces together ensures a complete repair and prevents near-term failure of worn parts. The kit provides all components as a matched set for optimal performance.
What if my Accord is a different year than 2003-2005?
This specific kit is engineered for 2003-2005 Honda Accord models with automatic transmission. Other model years use different shifter designs. Always check the compatibility chart on the product page to verify fitment for your exact vehicle.
Is this an OE Honda part or an aftermarket replacement?
This is an aftermarket replacement kit that replaces OE Honda part number 54141-SDA-A81. It's designed to match OE specifications and provide equivalent fit and function to the factory components.
A broken shifter button on your 2003-2005 Honda Accord doesn't have to leave you struggling to shift out of Park every time you drive. The APDTY 170250 shifter repair kit provides all three critical components—upper bezel, chrome button, and return spring—in one complete package, replacing OE part number 54141-SDA-A81 and restoring smooth, reliable shifter operation. Verify your vehicle's compatibility using the chart on the product page, and get your Accord's automatic transmission shifter working like new again.