The APDTY 156691 engine start/stop push button switch cover is a direct-replacement cosmetic cover that restores the appearance of your vehicle's ignition push button. This cover-only component snaps over the existing start/stop switch mechanism and is designed for 2008-2018 Chrysler, Dodge, Jeep, and Ram vehicles equipped with push-button ignition systems.
Key Takeaways
- Cover-only component that goes over the push-to-start/stop button—does not include internal switch mechanism
- Fits 2008-2018 Chrysler, Dodge, Jeep, and Ram models with push-button start (see full compatibility list below)
- Replaces worn, faded, or damaged ignition button covers
- Cross-references OE cover design for part number 1FU931X9AC
- Simple snap-on installation with no wiring required
Buy APDTY 156691 directly from APDTY
What Is the Engine Start/Stop Button Cover?
The engine start/stop button cover is the visible outer cap that sits atop the push-button ignition switch in your vehicle's dashboard or center console. While the internal switch and electronic components handle the actual engine start and security functions, the cover protects the switch and provides the tactile surface drivers press to start or stop the engine.
Over time, this cover can become scratched, faded, or cracked from repeated use, UV exposure, and cleaning chemicals. The APDTY 156691 cover is designed to restore the original appearance without requiring replacement of the entire ignition switch assembly.
What Vehicles Does APDTY 156691 Fit?
The APDTY 156691 engine start/stop button cover fits the following vehicles equipped with push-button ignition:
- Chrysler 300: 2009-2010
- Chrysler Town & Country: 2010-2015
- Dodge Challenger: 2008-2014
- Dodge Charger: 2009-2010
- Dodge Durango: 2011-2013
- Dodge Grand Caravan: 2010-2018
- Jeep Commander: 2009
- Jeep Grand Cherokee: 2009-2013
- Ram C/V Conversion Van: 2012-2015
This cover is compatible with vehicles using the OE cover design for part number 1FU931X9AC. If your vehicle year or model is not listed above, this cover may not fit. Always verify your vehicle's exact push-button configuration and compare the existing cover design before ordering.
When Should You Replace the Start Button Cover?
Common signs that your engine start/stop button cover needs replacement include:
- Visible wear or fading: The printed text or icon on the button surface has worn off or become illegible
- Cracking or chipping: The plastic cover has developed cracks, chips, or broken edges
- Loose fit: The cover no longer sits flush or rattles when pressed
- Sticky or unresponsive feel: The cover surface is sticky from cleaning product residue or has lost its tactile response
- Cosmetic damage: Scratches or discoloration from UV exposure detracts from interior appearance
Because this is a cover-only part, it addresses cosmetic and surface-level issues. If the underlying push-button switch is electrically faulty—such as failing to start the engine, requiring multiple presses, or triggering security system errors—the complete switch assembly may need diagnosis and replacement.
APDTY 156691 Specifications
| Specification | Details |
|---|---|
| APDTY Part Number | 156691 |
| Component Type | Engine Start/Stop Button Cover (Cover Only) |
| OE Reference | Cover for 1FU931X9AC |
| Material | Durable plastic with printed graphics |
| Fitment | 2008-2018 Chrysler, Dodge, Jeep, Ram (see compatibility list) |
| Installation | Snap-on, no wiring required |
How to Install the APDTY 156691 Cover
Installing the engine start/stop button cover is a straightforward process that typically requires no tools:
- Locate the existing button cover: Identify the push-to-start button on your dashboard or center console.
- Remove the old cover: Gently pry or pull the old cover straight up to disengage the retaining clips. Some covers may require slight rotation or careful prying with a plastic trim tool to release.
- Clean the switch housing: Wipe down the exposed switch mechanism with a clean, dry cloth to remove dust or residue.
- Align the new cover: Position the APDTY 156691 cover over the switch mechanism, ensuring any alignment tabs or notches line up correctly.
- Press to secure: Push the cover straight down until you hear or feel it click into place. The cover should sit flush and not move when pressed.
No wiring, programming, or special tools are required. If the cover does not snap on easily, do not force it—recheck alignment and ensure you have the correct cover for your vehicle's switch design.
Why Choose APDTY 156691?
APDTY specializes in replacement automotive electrical and interior components engineered to match OE specifications. The 156691 cover offers:
- Direct OE-style fit: Designed to match the original cover dimensions and mounting system
- Durable construction: Made from quality plastic materials resistant to daily wear and UV fading
- Cost-effective repair: Restores the button's appearance without the expense of replacing the entire switch assembly
- Easy installation: Snap-on design allows DIY replacement in minutes
This cover-only part is ideal for vehicles where the push-button switch is functioning correctly but the cosmetic cover is damaged or worn.
Frequently asked questions
Does APDTY 156691 include the electronic switch mechanism?
No, this is a cover-only component. It does not include the internal push-button switch, wiring, or electronic module. It is designed to snap over your existing, functioning switch mechanism.
Will this cover fit my 2016 Chrysler 300?
The APDTY 156691 is listed for 2009-2010 Chrysler 300 models. If your vehicle year is not in the compatibility list provided above, this cover may not fit. Check your vehicle's existing button design and OE part number before ordering.
Can I install this cover myself?
Yes. Installation is a simple snap-on process requiring no tools or wiring. Remove the old cover, align the new one, and press down until it clicks into place.
What if my push-button start is not working electronically?
This cover addresses cosmetic issues only. If your button fails to start the engine, requires multiple presses, or triggers security errors, the internal switch assembly or related electrical components may need diagnosis and replacement by a qualified technician.
The APDTY 156691 engine start/stop button cover is the cost-effective solution to restore your Chrysler, Dodge, Jeep, or Ram vehicle's worn or damaged ignition button appearance. With OE-style design, durable construction, and snap-on installation, this cover-only part returns your interior to like-new condition in minutes. If your push-button start switch is functioning properly but the cover is faded, cracked, or scratched, the APDTY 156691 delivers a professional repair without the expense of a full switch replacement. Verify your vehicle's compatibility with the list above and restore your ignition button's appearance today.