The APDTY 150003x4 jack lift point adapter set is a made-in-USA solution for safely lifting the 2016-2023 Tesla Model X without damaging the battery or side skirts. This set of four adapters fits precisely into the factory lift points on the Model X, providing proper support for floor jacks and vehicle lifts while protecting critical undercarriage components during tire changes, brake service, and suspension work.
Key Takeaways
- Set of four jack lift point adapters specifically designed for 2016-2023 Tesla Model X vehicles
- Protects battery pack and side skirts from damage during lifting operations
- Top shaft fits directly into factory lift points; includes rubber O-ring for pre-installation
- Made in USA; NOT compatible with LFP battery models (check Controls>Software>Additional Vehicle Info to verify)
- Works with both floor jacks and vehicle lifts for versatile shop or home use
Buy APDTY 150003x4 directly from APDTY
What Does the APDTY 150003x4 Jack Adapter Set Do?
The APDTY 150003x4 adapter set solves a critical problem for Tesla Model X owners and technicians: safely lifting the vehicle without damaging expensive components. The Model X has designated factory lift points on the undercarriage, but using a standard floor jack or lift directly against these points risks crushing side skirts or, worse, damaging the high-voltage battery pack.
Each adapter features a top shaft that inserts precisely into the factory lift point socket. This design distributes lifting force correctly through the vehicle's structural supports rather than against fragile trim or battery casing. The included rubber O-ring allows you to pre-install the adapter in the lift point, then position your jack or lift beneath it—eliminating the need to balance the adapter while positioning equipment.
This four-piece set covers all four factory lift points, enabling safe lifting for tire rotations, brake jobs, suspension repairs, or any service requiring wheel-off access.
Why Lift Point Protection Matters for Tesla Model X
The Tesla Model X sits low to the ground with a large battery pack spanning the undercarriage. The side skirts and battery casing are not structural components and cannot safely support the vehicle's weight. Attempting to lift without proper adapters can result in:
- Battery pack damage: Crushing or denting the battery casing can compromise internal cells, leading to expensive repairs or safety hazards
- Side skirt destruction: Plastic or composite side skirts crack or break under point loading from jack saddles
- Alignment issues: Lifting at incorrect points stresses the chassis unevenly
- Voided warranty claims: Damage from improper lifting may not be covered under Tesla warranty
The APDTY adapters eliminate these risks by channeling lift force through Tesla's engineered lift points, which are reinforced to handle the vehicle's weight safely.
What Tesla Model X Vehicles Fit the APDTY 150003x4 Adapter Set?
Based on verified product specifications, the APDTY 150003x4 jack lift point adapter set is compatible with:
| Year Range | Model | Notes |
|---|---|---|
| 2016-2023 | Tesla Model X | Except LFP Battery Models |
Important LFP Battery Exclusion: This adapter set does NOT fit Tesla Model X vehicles equipped with LFP (Lithium Iron Phosphate) batteries. To determine your battery type, access your vehicle's touchscreen and navigate to Controls > Software > Additional Vehicle Info. If your vehicle has an LFP battery, these adapters are not compatible. Standard lithium-ion battery Model X vehicles from 2016-2023 are fully supported.
Always verify fitment using the live compatibility chart on APDTY.com before purchasing. If you are unsure of your battery type or vehicle configuration, check your VIN or consult Tesla documentation.
APDTY 150003x4 Specifications and Features
| Specification | Detail |
|---|---|
| Part Number | APDTY 150003x4 |
| Quantity | Set of 4 adapters |
| Manufacturer Location | Made in USA |
| Top Shaft Design | Fits factory Tesla Model X lift points |
| O-Ring Included | Yes, allows pre-installation in lift point |
| Compatible Equipment | Floor jacks and vehicle lifts |
| Primary Protection | Battery pack and side skirts |
| Fitment | 2016-2023 Tesla Model X (non-LFP battery) |
The made-in-USA construction ensures quality materials and precise tolerances for a secure fit in Tesla's factory lift points. The rubber O-ring is a practical feature that holds each adapter in place while you position your jack, eliminating the frustration of trying to balance an adapter on a jack saddle while crawling under the vehicle.
How to Use Jack Lift Point Adapters on Tesla Model X
Using the APDTY 150003x4 adapter set is straightforward, but always follow basic vehicle lifting safety protocols:
- Locate factory lift points: Consult your Tesla Model X owner's manual for the exact location of all four factory lift points on the undercarriage. They are typically marked or molded into the chassis.
- Install adapters: Insert the top shaft of each APDTY adapter into a factory lift point. The rubber O-ring should grip the lift point and hold the adapter in place.
- Position jack or lift: Place your floor jack saddle or lift pad directly beneath the installed adapter. The adapter distributes force from your equipment into the factory lift point.
- Lift vehicle: Raise the vehicle slowly, ensuring the adapter remains seated in the lift point and centered on your jack or lift pad.
- Use jack stands: Never work under a vehicle supported only by a jack. Once lifted, position jack stands at appropriate support points before performing any work.
Safety Reminders: Always lift on a flat, stable surface. Engage the parking brake. Verify the vehicle is in Park. Ensure no one is inside the vehicle during lifting. Electric vehicles like the Tesla Model X are heavier than comparably sized gasoline vehicles due to battery weight—use equipment rated for the load.
For technicians using two-post or four-post lifts, place one adapter at each factory lift point and position lift arms beneath them. This method is standard in professional shops servicing Tesla vehicles.
Frequently asked questions
Can I use the APDTY 150003x4 adapters with any floor jack?
Yes, these adapters work with any floor jack or vehicle lift. The adapter sits between the jack saddle and the factory lift point, so as long as your jack is rated for the Tesla Model X's weight (typically 5,000+ lbs depending on configuration), the adapters will function properly.
How do I know if my Tesla Model X has an LFP battery?
On your Model X touchscreen, navigate to Controls > Software > Additional Vehicle Info. This screen will display battery type information. If it indicates LFP (Lithium Iron Phosphate), these adapters are not compatible. Most 2016-2023 Model X vehicles use standard lithium-ion batteries and are compatible.
Do I need all four adapters, or can I use just two?
The set includes four adapters to cover all factory lift points. For some service procedures like tire rotation, you may lift one end of the vehicle at a time using two adapters. For other jobs requiring full vehicle lift, you'll use all four. Having the complete set ensures you can perform any service safely.
Will these adapters fit Tesla Model S or Model 3?
No. The APDTY 150003x4 is specifically designed for 2016-2023 Tesla Model X lift points. Model S, Model 3, and Model Y have different lift point configurations and require different adapters. Always verify part compatibility for your specific Tesla model.
Protecting your Tesla Model X battery and side skirts during lifting operations is essential, whether you're a DIY owner performing routine maintenance or a shop technician servicing customer vehicles. The APDTY 150003x4 jack lift point adapter set provides the correct interface between your lifting equipment and the Model X factory lift points, preventing costly damage while enabling safe access for tire changes, brake service, and suspension work. Made in the USA and designed for precise fitment on 2016-2023 Model X vehicles (excluding LFP battery models), this four-piece set is a必備 tool for anyone maintaining a Tesla Model X. Verify your vehicle compatibility on APDTY.com and lift with confidence knowing your equipment and vehicle are properly protected.
Order APDTY 150003x4 from APDTY