APDTY 141372 is a brand-new rear left (driver-side) power window motor and regulator assembly designed to restore full function to a failed rear window in your vehicle. This direct-fit replacement solves slow, stuck, or inoperative rear driver-side windows caused by worn motor gears, stripped regulator cables, or broken mounting hardware. Compatible with 2016–2019 Chevrolet Volt models, APDTY 141372 replaces OE part numbers 84319808, 23365272, and 23104912, delivering OE-quality performance at a value price.
Key Takeaways
- Complete assembly includes motor and regulator in one unit for faster, easier installation
- Direct replacement for OE part numbers 84319808, 23365272, 23104912
- Fits 2016–2019 Chevrolet Volt rear left (driver-side) position—verify your specific year and model on the compatibility chart
- Fixes common window failures: slow operation, stuck glass, grinding noises, or complete motor failure
- Brand-new OE-quality construction designed for long service life
Buy APDTY 141372 directly from APDTY
What Does the APDTY 141372 Window Motor and Regulator Assembly Do?
The power window motor and regulator assembly is the mechanical system that raises and lowers your rear driver-side window glass. The motor generates rotational force, which the regulator mechanism converts into vertical motion via cables, pulleys, or gear-driven arms. When you press the window switch, electrical current flows to the motor, driving the regulator to move the glass smoothly up or down within the door frame.
APDTY 141372 is a complete assembly combining both the motor and regulator into a single bolt-in unit. This integrated design eliminates the need to source and install components separately, reducing labor time and ensuring perfect compatibility between motor torque and regulator geometry. The assembly mounts to factory holes inside the rear door panel and connects to your vehicle's existing wiring harness and glass mounting points.
What Are the Symptoms of a Failed Rear Window Motor or Regulator?
Power window failures typically develop gradually as internal components wear, though sudden breakage can occur. Common symptoms indicating your rear left window assembly needs replacement include:
- Window moves slowly or hesitates: Worn motor brushes, binding regulator cables, or dried lubricant cause sluggish operation.
- Window is stuck in one position: Complete motor failure, broken regulator cables, or stripped gear teeth prevent movement.
- Grinding, clicking, or popping noises: Damaged gear teeth, loose mounting hardware, or frayed cables create abnormal sounds during operation.
- Window drops into door or tilts: Broken regulator arms or detached mounting clips allow glass to fall out of alignment.
- Motor runs but glass does not move: Stripped regulator mechanism or separated motor-to-regulator connection prevents force transfer.
- Window operates only in one direction: Partial motor winding failure or switch contact issues limit directional control.
Ignoring these symptoms can lead to complete window failure, leaving your vehicle unsecured or exposed to weather. DIY replacement of the entire motor-regulator assembly is the most reliable repair solution and typically more cost-effective than attempting to service individual components.
Which Vehicles Does APDTY 141372 Fit?
APDTY 141372 is engineered as a direct replacement for the rear left (driver-side) power window motor and regulator assembly in the following vehicle:
- 2016 Chevrolet Volt
- 2017 Chevrolet Volt
- 2018 Chevrolet Volt
- 2019 Chevrolet Volt
Important: Vehicle configurations can vary by production date, trim level, and factory options. Always verify compatibility using the live fitment chart on the APDTY product page before ordering. The chart cross-references your specific year, make, and model to confirm this assembly matches your vehicle's window system design.
APDTY 141372 Specifications and OE Cross-References
This assembly meets or exceeds original equipment standards for fit, function, and durability. Review the specifications and OE part number cross-references below to confirm application:
| Specification | Detail |
|---|---|
| APDTY Part Number | 141372 |
| Position | Rear Left (Driver-Side Rear) |
| Component Type | Complete Window Motor & Regulator Assembly |
| Condition | Brand New |
| OE Replacement Numbers | 84319808, 23365272, 23104912 |
| Confirmed Fitment | 2016–2019 Chevrolet Volt (verify with compatibility chart) |
| Installation | Direct bolt-in replacement, connects to factory wiring harness |
Using the correct OE cross-reference numbers ensures you're ordering the exact assembly your vehicle requires. If you're replacing a failed unit, compare the part numbers stamped on your original assembly to the OE numbers listed above.
How Do You Install a Rear Window Motor and Regulator Assembly?
Replacing a rear window motor and regulator assembly is a moderate-skill DIY job requiring basic hand tools, a trim panel removal set, and attention to detail. The general procedure includes:
- Disconnect the battery: Remove the negative terminal to eliminate electrical hazards before working inside the door.
- Remove the rear door panel: Use trim tools to release plastic clips and screws securing the interior panel. Disconnect any electrical connectors for switches or speakers.
- Secure the window glass: If the glass is movable, tape it in the fully up position to prevent dropping during assembly removal.
- Disconnect the wiring harness: Unplug the motor connector from the vehicle's wiring harness.
- Remove the old assembly: Unbolt the regulator mounting fasteners (typically 3–5 bolts) and detach the glass from the regulator mounting clips. Carefully extract the assembly through the access opening in the door frame.
- Install APDTY 141372: Insert the new assembly into the door, align mounting holes, and secure with factory bolts. Attach the glass to the regulator mounting points and reconnect the wiring harness.
- Test operation: Reconnect the battery and cycle the window up and down multiple times to confirm smooth, quiet operation and proper glass alignment.
- Reinstall the door panel: Snap the panel back into place, secure all fasteners, and reconnect electrical components.
Safety Notes: Always disconnect the battery before working on electrical components. Wear gloves and eye protection—window glass edges and metal regulator components can cause cuts. Support the glass securely to prevent it from falling and shattering during assembly removal. If your vehicle is equipped with side-curtain airbags in the rear doors, handle all wiring and trim panels with care to avoid accidental deployment or sensor damage.
Consult a factory service manual or detailed online repair guide for torque specifications and model-specific procedures. If you lack the tools or experience for door panel removal, professional installation ensures correct alignment and electrical connection.
Frequently asked questions
Does APDTY 141372 include both the motor and regulator?
Yes. APDTY 141372 is a complete assembly that includes both the power window motor and regulator mechanism in one integrated unit, ready to bolt into your vehicle.
Will this assembly fit the passenger side rear window?
No. APDTY 141372 is designed specifically for the rear left (driver-side) position. The passenger-side rear window requires a different part number with a mirror-image regulator design.
Do I need to replace both rear window assemblies at the same time?
Not necessarily. If only one window is failing, you can replace just that assembly. However, if both rear windows are original and one has failed due to age, the other may fail soon, so some technicians recommend replacing both for convenience.
Can I reuse my old mounting bolts and wiring harness?
Yes. APDTY 141372 uses your vehicle's existing mounting hardware and plugs directly into the factory wiring harness. Inspect bolts for thread damage and replace if corroded or stripped.
A failed rear window motor or regulator leaves your vehicle vulnerable to weather, theft, and passenger discomfort. APDTY 141372 delivers a complete, bolt-in solution that restores full power window function to your 2016–2019 Chevrolet Volt. Verify compatibility on the APDTY product page, order with confidence, and follow proper installation procedures to enjoy years of smooth, reliable window operation. Replace your worn or broken assembly today and regain the convenience and security of a fully operational rear driver-side window.