The APDTY 141351 window motor and regulator assembly is a brand-new, direct-fit replacement for the front left (driver-side) power window system in 2016-2019 Chevrolet Volt models. This complete assembly eliminates the slow, intermittent, or non-functional driver window issues caused by worn gears, failed motors, or broken regulator mechanisms, restoring smooth, reliable one-touch operation.
Key Takeaways
- Direct replacement for 2016-2019 Chevrolet Volt front left (driver-side) door
- Complete motor and regulator assembly—no need to source components separately
- Replaces OE part numbers 84585093, 23340492, and 84319806
- Auto up/down functions may require a simple reset procedure after installation
- Brand-new unit backed by APDTY quality standards
Buy APDTY 141351 directly from APDTY
What Does the APDTY 141351 Window Motor & Regulator Assembly Do?
The window motor and regulator assembly is the complete mechanism that raises and lowers your driver-side window. The electric motor provides the power, while the regulator—a metal track-and-cable or scissor-arm mechanism—guides the glass up and down inside the door. When either component fails, the window may move slowly, make grinding noises, drop into the door, or stop working entirely.
APDTY 141351 combines both the motor and regulator into a single pre-assembled unit, simplifying diagnosis and installation. Instead of troubleshooting whether the motor or regulator is at fault, you replace the entire system in one step, ensuring both components are brand-new and properly matched.
What Are the Symptoms of a Failing Window Motor or Regulator?
A worn or broken window motor and regulator assembly typically shows one or more of these warning signs:
- Slow or intermittent operation: The window moves unevenly, pauses mid-travel, or only works sometimes.
- Grinding, clicking, or humming noises: Stripped gears in the motor or bent regulator tracks cause abnormal sounds.
- Window drops into the door: A broken regulator cable or failed mounting bracket lets the glass fall.
- No response from the window switch: If the switch and fuse are good but the window won't move, the motor or regulator has likely failed.
- Auto up/down functions stop working: The window moves manually but no longer responds to one-touch commands.
If you experience any of these symptoms in your 2016-2019 Chevrolet Volt driver-side door, APDTY 141351 addresses all motor and regulator failures in a single replacement.
Which Vehicles Does APDTY 141351 Fit?
Based on the verified product data, APDTY 141351 is compatible with:
| Year | Make | Model | Position |
|---|---|---|---|
| 2016 | Chevrolet | Volt | Front Left (Driver-Side) |
| 2017 | Chevrolet | Volt | Front Left (Driver-Side) |
| 2018 | Chevrolet | Volt | Front Left (Driver-Side) |
| 2019 | Chevrolet | Volt | Front Left (Driver-Side) |
This assembly is designed exclusively for the front left (driver-side) door. If you need a different position or are unsure about your specific vehicle trim or build date, consult the live compatibility chart on the product page before ordering.
Specifications and OE Part Number Cross-Reference
APDTY 141351 is engineered to meet or exceed OEM specifications and directly replaces the following factory part numbers:
| Specification | Detail |
|---|---|
| APDTY Part Number | 141351 |
| Position | Front Left (Driver-Side) |
| Condition | Brand New |
| Assembly Type | Complete Motor & Regulator |
| OE Part Numbers Replaced | 84585093, 23340492, 84319806 |
Using these OE numbers, you can verify fitment against your vehicle's service manual or parts lookup system. If your current assembly carries any of these part numbers, APDTY 141351 is the correct replacement.
Installation Overview and Auto Up/Down Reset Procedure
Installing a window motor and regulator assembly is a straightforward DIY repair for most home mechanics, though some door-panel removal and electrical connector work is required. General steps include:
- Disconnect the battery to prevent accidental window activation or electrical shorts.
- Remove the interior door panel using a trim tool and screwdriver. You may need to disconnect speaker wires and remove the door handle surround.
- Support the window glass with tape or a prop to prevent it from falling when you disconnect the regulator.
- Unbolt the old assembly from the door frame and disconnect the motor's electrical connector.
- Install APDTY 141351 in reverse order, ensuring all bolts are secure and the glass is properly aligned in the regulator channels.
- Reconnect the battery and test the window operation before reinstalling the door panel.
Resetting Auto Up/Down Functions: Assuming your window switch is functioning correctly, the one-touch auto up and down features may need to be re-learned after installing a new motor. The typical reset procedure is:
- Auto Up: Roll the window all the way up using the switch, then continue holding the switch in the up position for 10 seconds after the glass reaches the top.
- Auto Down: Roll the window all the way down, then hold the switch in the down position for 10 seconds after the glass reaches the bottom.
If this procedure does not restore auto functions, consult your owner's manual or search YouTube for model-specific reset instructions. Some Volt trims may require a slightly different hold time or ignition-on sequence.
Frequently asked questions
Does APDTY 141351 include both the motor and the regulator?
Yes. APDTY 141351 is a complete, pre-assembled unit that includes both the electric motor and the regulator mechanism, so you don't need to purchase or install components separately.
Will this assembly work on the passenger side of my Volt?
No. APDTY 141351 is designed specifically for the front left (driver-side) door. The passenger-side assembly has a different part number and configuration.
Why won't my auto up/down features work after I installed the new motor?
The window control module needs to relearn the glass travel limits. Hold the window switch in the up position for 10 seconds after the window is fully closed, then repeat the process in the down position. Check your owner's manual or YouTube for model-specific reset steps.
Can I install this assembly myself, or do I need a professional?
Most DIYers with basic hand tools can complete this repair in 1-2 hours. You'll need to remove the door panel, disconnect the battery, and handle a few electrical connectors, but no special tools or programming are required.
If your 2016-2019 Chevrolet Volt driver-side window is slow, noisy, or has stopped working altogether, APDTY 141351 delivers a complete, factory-quality solution in a single assembly. By replacing both the motor and regulator together, you eliminate the guesswork and ensure smooth, reliable operation for years to come. Check the live compatibility chart to confirm fitment for your specific vehicle, and restore your power window convenience today.