APDTY 121915 is a brand-new replacement keyless entry remote key fob transmitter designed for select 2002-2016 Nissan and 2003-2009 Infiniti models equipped with 3-button systems without Intelligent Key functionality. This remote replaces lost, damaged, or worn original fobs, restoring lock, unlock, and panic button operation for convenient vehicle access and security.
Key Takeaways
- Direct replacement for Nissan OE part numbers 28268-5W501, 28268-5Y501, 282687Z800, 28268-C990C, 28268-EA00A, and 28268ZT03A
- Fits select 2002-2016 Nissan trucks, SUVs, and sedans without Intelligent Key systems (3-button configuration only)
- Compatible with 2003-2009 Infiniti FX35 and FX45 models without Intelligent Key
- Requires professional programming to your vehicle's security system after purchase
- Not compatible with vehicles equipped with Intelligent Key, power liftgate remote functions, or 4+ button fobs
Buy APDTY 121915 directly from APDTY
What Does the APDTY 121915 Remote Key Fob Do?
The APDTY 121915 keyless entry remote transmits radio frequency signals to your vehicle's receiver module, allowing you to lock and unlock doors, activate the panic alarm, and arm or disarm the factory security system from a distance. The 3-button design includes:
- Lock button: Secures all doors and activates the vehicle's anti-theft system
- Unlock button: Disarms the alarm and unlocks driver or all doors (depending on programming)
- Panic button: Triggers horn and lights to locate the vehicle or deter threats
This remote operates on the same frequency as the original Nissan/Infiniti equipment and integrates with your vehicle's existing keyless entry module—no additional hardware installation required beyond battery insertion and programming.
What Are the Signs You Need a Replacement Key Fob?
Common symptoms indicating your Nissan or Infiniti remote has failed or requires replacement include:
- No response from any button: The vehicle does not lock, unlock, or respond to panic button presses
- Intermittent operation: Remote works only at very close range (under 10 feet) or requires multiple button presses
- Physical damage: Cracked case, broken buttons, or internal circuit board exposure from drops or wear
- Battery replacement doesn't help: Installing a fresh CR2032 battery (typical for these remotes) does not restore function
- Lost or stolen remote: You need an additional or replacement fob for security or convenience
If your remote exhibits these issues and a new battery does not resolve them, the internal transmitter circuitry has likely failed and the unit must be replaced.
Which Nissan and Infiniti Vehicles Does the APDTY 121915 Fit?
This remote is engineered for specific Nissan and Infiniti models without Intelligent Key systems and equipped with 3-button keyless entry. Confirmed compatible applications include:
| Make | Model | Years | Notes |
|---|---|---|---|
| Infiniti | FX35, FX45 | 2003-2009 | Without Intelligent Key System; 3 Button |
| Nissan | Armada | 2006-2015 | Without Power Liftgate; Without Intelligent Key System; 3 Button |
| Nissan | Frontier | 2002-2016 | Without Intelligent Key System; 3 Button |
| Nissan | Murano | 2003-2007 | Without Intelligent Key System; 3 Button |
| Nissan | NV1500, NV2500, NV3500 | 2012-2013 | Without Intelligent Key System; 3 Button |
| Nissan | Pathfinder | 2002-2014 | Without Intelligent Key System; 3 Button |
| Nissan | Quest | 2004-2009 | Without Power Liftgate; Without Intelligent Key System; 3 Button |
| Nissan | Sentra | 2007-2012 | Without Intelligent Key System; 3 Button |
| Nissan | Titan | 2004-2014 | Without Intelligent Key System; 3 Button |
| Nissan | Versa | 2007-2013 | Without Intelligent Key System; 3 Button |
| Nissan | Xterra | 2002-2014 | Without Intelligent Key System; 3 Button |
Important: This remote is not compatible with vehicles equipped with Intelligent Key (push-button start) systems, 4-button remotes, or models that use integrated key-and-fob units. Always verify your specific year, make, model, and equipment level using the compatibility chart on the product page before ordering.
APDTY 121915 Specifications and OE Cross-Reference
| APDTY Part Number: | 121915 |
| Replaces Nissan OE Numbers: | 28268-5W501, 28268-5Y501, 282687Z800, 28268-C990C, 28268-EA00A, 28268ZT03A |
| Button Configuration: | 3-Button (Lock, Unlock, Panic) |
| Battery Type: | CR2032 3V lithium coin cell (typically; verify during programming) |
| Frequency: | Factory-matched to Nissan/Infiniti keyless entry systems |
| Programming Required: | Yes—must be programmed to vehicle security system by dealer or qualified locksmith |
| Condition: | Brand New |
| Warranty: | Check APDTY.com for current warranty terms |
This remote includes the transmitter circuit board and case; battery may or may not be pre-installed depending on shipping regulations.
How Do You Program the APDTY 121915 Remote to Your Vehicle?
Keyless entry remotes must be programmed (synchronized) to your vehicle's security system before they will operate. Programming methods vary by model year and system type:
Self-Programming (Limited Models)
Some Nissan and Infiniti models allow owner programming using a sequence of door lock/unlock cycles, ignition key cycles, and button presses within a specific time window. Consult your owner's manual or search online for "[year] [model] keyless remote programming procedure" to determine if your vehicle supports DIY programming.
Professional Programming (Most Common)
Most applications require professional programming using:
- Nissan/Infiniti dealership: Technicians use factory scan tools to register the new remote's unique ID to the vehicle's Body Control Module (BCM) or keyless entry receiver
- Automotive locksmith: Independent locksmiths with OEM-compatible programming equipment can often program remotes at lower cost than dealerships
Programming typically takes 10-20 minutes and may incur a service fee separate from the remote purchase. Bring proof of vehicle ownership and any existing working remotes, as some systems allow registration of multiple fobs simultaneously.
Installation Steps
- Insert a fresh CR2032 battery into the remote (observe polarity markings)
- Bring the remote and vehicle documentation to the dealer or locksmith
- Technician will use scan tool or manual procedure to enter programming mode
- Follow prompts to register the new remote ID to the vehicle
- Test all buttons (lock, unlock, panic) at varying distances to confirm successful programming
Note: Programming erases all previously registered remotes on some systems, so have all desired remotes on hand during the service visit.
Why Choose the APDTY 121915 Over Dealer Remotes?
APDTY replacement remotes offer several advantages for Nissan and Infiniti owners:
- Significant cost savings: Aftermarket remotes typically cost 50-70% less than dealer-supplied OE units while providing identical functionality
- OE-equivalent quality: Direct replacement design matches factory specifications for frequency, range, and button configuration
- Faster availability: In-stock remotes ship immediately, avoiding dealer backorder delays
- Multiple OE number compatibility: Single SKU replaces six different Nissan part numbers across 11+ model lines
- Same programming process: Uses identical registration procedures as factory remotes—no special tools or modifications required
For DIY owners, purchasing the remote separately and arranging independent locksmith programming often results in total costs under half of dealer parts-and-service pricing.
Frequently asked questions
Does the APDTY 121915 remote come pre-programmed to my vehicle?
No. All keyless entry remotes must be programmed to your specific vehicle's security system after purchase. This requires either a DIY programming sequence (if your model supports it) or professional programming by a Nissan dealer or automotive locksmith with the proper scan tools.
Will this remote work on my Nissan if it has push-button start?
No. The APDTY 121915 is designed only for vehicles without Intelligent Key systems. If your Nissan or Infiniti has push-button start, proximity unlock, or a key fob integrated with the ignition key blade, you need a different remote part number. Always verify compatibility using the product page chart.
Can I program multiple APDTY 121915 remotes to the same vehicle?
Yes, most Nissan and Infiniti keyless entry systems support 2-4 registered remotes. During the programming session, have all remotes (new and existing) available, as some systems erase all previous registrations when entering programming mode and require re-registration of every fob.
What should I do if the remote works only at very short range after programming?
First, replace the battery with a fresh CR2032 lithium cell and re-test. If range remains under 15-20 feet, the vehicle's keyless entry receiver antenna (usually located near the rear window or under the dash) may have a loose connection or the receiver module itself may be failing. Have a technician diagnose the vehicle's receiver system.
The APDTY 121915 keyless entry remote delivers factory-equivalent lock, unlock, and panic functionality for 2002-2016 Nissan and 2003-2009 Infiniti vehicles equipped with 3-button systems without Intelligent Key. By replacing OE part numbers 28268-5W501, 28268-5Y501, 282687Z800, 28268-C990C, 28268-EA00A, and 28268ZT03A, this aftermarket remote restores convenient keyless operation at a fraction of dealer pricing. Verify your exact vehicle year and equipment configuration using the compatibility chart, then arrange professional programming to complete the installation. For additional technical support or to confirm fitment, contact APDTY's customer service team or consult the live compatibility tool on the product page.