APDTY 112757 is a heated replacement mirror glass designed for the left (driver-side) on 2007-2013 Nissan Altima vehicles equipped with the 3.5L engine. This direct-fit glass restores full visibility and heating function after mirror damage from road debris, vandalism, or weathering, and replaces Nissan OE part number 96302-JB17E (96302JB17E).
Key Takeaways
- Direct replacement for left driver-side heated mirror glass on 2007-2013 Nissan Altima 3.5L models
- Replaces OE part number 96302-JB17E / 96302JB17E
- Includes integrated heating element to clear frost, fog, and ice
- Restores blind-spot visibility and safe lane changes after cracked or missing mirror glass
- Installation involves removing old glass and snapping or adhering new glass into the backing plate
Buy APDTY 112757 directly from APDTY
What Does the APDTY 112757 Mirror Glass Replace?
The APDTY 112757 replaces the heated mirror glass on the left (driver) side of 2007-2013 Nissan Altima vehicles with the 3.5L engine. The original Nissan part number is 96302-JB17E (also written 96302JB17E). When the mirror glass cracks, shatters, or falls out of the housing—often caused by impacts from rocks, shopping carts, or freeze-thaw cycles—the APDTY 112757 restores full mirror function without replacing the entire mirror assembly.
This glass includes the integral heating element that connects to the vehicle's defroster circuit, ensuring you can clear ice and condensation quickly in cold or humid conditions.
What Are the Symptoms of a Broken or Missing Mirror Glass?
Recognizing a damaged mirror glass is straightforward, but understanding the safety and legal implications is critical:
- Cracked, chipped, or shattered glass – The mirror surface is fractured, creating distorted reflections or sharp edges.
- Missing glass – The glass has fallen out entirely, leaving only the backing plate and adjustment motor exposed.
- No defrost function – Ice, fog, or condensation no longer clears from the mirror, even when the rear defrost is activated.
- Reduced rear visibility – You cannot see vehicles in adjacent lanes or behind you, increasing blind-spot risk during lane changes and merging.
- Failed state inspection – Many states require both side mirrors to be intact and functional; a missing or broken driver-side mirror will cause inspection failure and may result in a traffic citation.
Driving with a missing driver-side mirror is illegal in most jurisdictions and dramatically increases accident risk. Replacing the glass promptly restores compliance and safety.
Which Vehicles Does APDTY 112757 Fit?
According to APDTY's verified fitment data, the APDTY 112757 fits the following vehicles:
| Year | Make | Model | Engine | Position |
|---|---|---|---|---|
| 2007–2013 | Nissan | Altima | 3.5L | Left (Driver) |
Important: This part is confirmed for Altima models with the 3.5L V6 engine only. If your Altima has a different engine (such as the 2.5L four-cylinder), or if you drive a different Nissan model or model year, this part may not fit. Always verify compatibility using the live fitment chart on the APDTY product page or contact APDTY support before ordering.
What Are the Specifications of APDTY 112757?
| APDTY Part Number | 112757 |
| OE Replacement Number | 96302-JB17E, 96302JB17E |
| Position | Left (Driver-Side) |
| Heated | Yes – Integrated heating element |
| Fitment | 2007–2013 Nissan Altima 3.5L |
| Condition | Brand New |
| Installation Type | Snap-in or adhesive-backed (varies by mirror design) |
How Do You Install the APDTY 112757 Mirror Glass?
Replacing side-view mirror glass is a straightforward DIY task for most vehicle owners. The general process is as follows:
- Prepare the work area – Park on level ground, turn off the ignition, and gather safety glasses, a small flat-blade screwdriver or plastic trim tool, and gloves to protect against glass shards.
- Remove the old glass – If the glass is cracked but still attached, carefully pry it away from the backing plate using the trim tool, starting at one edge. If the glass has fallen out, inspect the backing plate for any remaining adhesive or retaining clips. Wear gloves and eye protection; broken glass is sharp.
- Clean the backing plate – Use isopropyl alcohol and a lint-free cloth to remove old adhesive, dirt, and moisture. Ensure the heating-element connector (if present) is clean and free of corrosion.
- Connect the heating element – If the new glass has an electrical connector for the heater, plug it into the socket on the backing plate. Ensure the connection is snug and the wires are routed away from moving parts of the mirror adjustment mechanism.
- Install the new glass – Align the APDTY 112757 glass with the backing plate. Depending on your Altima's mirror design, the glass may snap into retaining clips or require adhesive backing. If adhesive-backed, press firmly for 30–60 seconds, then allow the adhesive to cure per manufacturer instructions (typically 24 hours before washing or heavy use).
- Test function – Turn the ignition to the accessory position and activate the rear defroster. The mirror should warm noticeably within a few minutes. Test the mirror adjustment (if electric) to ensure the glass is securely seated and does not shift during movement.
Safety note: Do not force the glass. If resistance is encountered, double-check alignment and clip engagement. Forcing the glass can crack it or damage the backing plate.
Why Choose APDTY 112757 Over OE or Other Aftermarket Options?
The APDTY 112757 offers several advantages for Nissan Altima owners:
- Direct OE-equivalent fit – Designed to match the OE part 96302-JB17E in dimensions, curvature, and mounting method, ensuring a factory-like appearance and function.
- Integrated heating element – Maintains defroster compatibility, critical for cold-climate driving and passing state safety inspections.
- Cost-effective repair – Replacing only the glass is significantly less expensive than replacing the entire mirror assembly, and installation requires no special tools or professional labor.
- Brand-new condition – Unlike salvage-yard glass, the APDTY 112757 is new, clean, and free of scratches, oxidation, or prior damage.
- Wide availability – Sold on APDTY.com and through major marketplaces (eBay, Amazon), with fast shipping and customer support.
For 2007-2013 Nissan Altima 3.5L owners, the APDTY 112757 is a reliable, budget-conscious solution to restore driver-side mirror visibility and heating function.
Frequently asked questions
Will APDTY 112757 fit my 2010 Nissan Altima 2.5L?
No. APDTY's verified fitment data specifies this part for 2007-2013 Altima models with the 3.5L engine only. If your Altima has the 2.5L four-cylinder, check the APDTY live compatibility chart or contact support to find the correct part number for your vehicle.
Does this mirror glass include the backing plate or motor?
No. The APDTY 112757 is the glass and heating element only. It installs onto your existing mirror backing plate and adjustment motor. If your backing plate or motor is damaged, you will need to replace the entire mirror assembly.
How long does the adhesive take to cure?
If your mirror uses adhesive backing, allow 24 hours of cure time before washing the vehicle or driving in heavy rain. Test the mirror adjustment gently after installation, but avoid aggressive adjustments or impacts during the curing period.
Can I install this myself, or do I need a shop?
Most DIY owners can install mirror glass in 15–30 minutes using basic hand tools. The process involves removing the old glass, cleaning the backing plate, connecting the heater plug (if applicable), and snapping or adhering the new glass into place. If you are uncomfortable working with glass or small electrical connectors, a body shop or glass specialist can install it quickly and inexpensively.
The APDTY 112757 heated mirror glass is the direct-fit, cost-effective solution for replacing broken or missing driver-side mirror glass on 2007-2013 Nissan Altima 3.5L models. By restoring rear visibility and defrost function, this OE-equivalent part keeps you safe, legal, and compliant with state inspection requirements—without the expense of a full mirror assembly replacement. Verify your vehicle's compatibility on the APDTY product page, order with confidence, and get back on the road with a clear view in every direction.