The APDTY 035924 center console lid replacement kit is a complete repair solution for broken or cracked armrest lids in GM trucks and SUVs equipped with split bench seating. This kit includes a brand-new light gray faux leather lid, replacement hinge assembly, and all necessary hardware to restore function and appearance to your worn center console. It directly replaces OE part number 19127365 and fits select 1999-2007 Chevrolet and GMC full-size vehicles.
Key Takeaways
- Complete kit includes light gray faux leather lid, new hinge assembly, and mounting hardware
- Fits 1999-2007 Silverado/Sierra, 2001-2006 Tahoe/Suburban/Yukon/Avalanche, 2002-2006 Escalade with split bench seating only
- Replaces GM OE part number 19127365
- Also available in tan (APDTY 035923) and dark gray (APDTY 035922)
- Match the product image to your existing lid to verify correct style and color before ordering
Buy APDTY 035924 directly from APDTY
What Does the APDTY 035924 Console Lid Kit Include?
The APDTY 035924 is a complete replacement assembly designed to fix the common failure point in GM center console armrests: the brittle plastic hinge that cracks under repeated use. This kit contains:
- Armrest lid – Light gray faux leather cover over a rigid backing, designed to match OE appearance
- Hinge assembly – Brand-new pivot mechanism engineered to replace the factory hinge that commonly breaks
- Mounting hardware – All fasteners and clips required for installation
This is not a cover or skin that slips over a damaged lid. It is a full replacement assembly that restores structural integrity and cosmetic appearance in one installation.
What Are the Symptoms of a Broken Console Lid or Hinge?
GM center console lids on these truck and SUV platforms commonly fail due to plastic hinge fatigue. Typical symptoms include:
- Lid will not stay closed or flops open while driving
- Cracking or splitting along the hinge area or where the lid attaches to the console base
- Loose or wobbly lid that feels unstable when opened or used as an armrest
- Visible wear or tearing of the leather or vinyl covering, especially around stress points
- Hinge pin separation or broken mounting tabs on the console base
If any of these conditions are present, replacing the entire lid and hinge assembly is the most durable and cost-effective repair.
Which Vehicles Does APDTY 035924 Fit?
The APDTY 035924 light gray console lid kit is compatible with the following GM full-size trucks and SUVs equipped with split bench front seating:
| Make/Model | Year Range | Notes |
|---|---|---|
| Cadillac Escalade | 2002-2006 | Split bench seating only |
| Chevrolet Silverado | 1999-2007 | 2007 Classic models only, split bench seating |
| GMC Sierra | 1999-2007 | 2007 Classic models only, split bench seating |
| Chevrolet Avalanche | 2001-2006 | Split bench seating only |
| Chevrolet Suburban | 2001-2006 | Split bench seating only |
| Chevrolet Tahoe | 2001-2006 | Split bench seating only |
| GMC Yukon | 2001-2006 | Split bench seating only |
Important: This kit fits vehicles with split bench front seats only. Vehicles equipped with bucket seats or captain's chairs use a different console design. Always match the product image to your existing lid to verify correct style and color before ordering. If your vehicle's compatibility is unclear, consult the live fitment tool on the APDTY product page.
APDTY 035924 Specifications and Part Number Cross-Reference
| Specification | Detail |
|---|---|
| APDTY Part Number | 035924 |
| Replaces OE Number | 19127365 |
| Color | Light Gray |
| Material | Faux Leather over Rigid Backing |
| Kit Contents | Lid Assembly, Hinge, Hardware |
| Seating Requirement | Split Bench Front Seats Only |
| Related Part Numbers | APDTY 035923 (Tan), APDTY 035922 (Dark Gray) |
If your console interior is tan or dark gray, APDTY offers matching kits under part numbers 035923 and 035922, respectively. All three kits use the same hinge design and hardware; only the lid color differs.
How Do You Install the APDTY 035924 Console Lid Kit?
Replacing the center console lid and hinge on these GM vehicles is a straightforward DIY task that typically requires basic hand tools and 30-60 minutes. General installation steps include:
- Remove the old lid assembly: Open the console and locate the hinge mounting points. Depending on the model, you may need to remove screws, clips, or pry tabs securing the old hinge to the console base.
- Clean the mounting area: Remove any broken plastic fragments, dirt, or debris from the console interior to ensure a clean, secure fit for the new hinge.
- Install the new hinge: Position the replacement hinge assembly in the factory mounting location and secure it with the included hardware. Follow any alignment marks or guides molded into the console base.
- Attach the new lid: Align the lid with the hinge and snap or bolt it into place per the kit instructions. Test the lid for smooth operation and secure closure.
- Verify function: Open and close the lid several times to ensure proper alignment, no interference with surrounding components, and secure latching.
Note: Console designs vary slightly between model years and trim levels. Always compare the new kit to your existing assembly before beginning installation. If you encounter unexpected differences in mounting style, consult a vehicle-specific repair manual or contact APDTY customer support for guidance.
Frequently asked questions
Does APDTY 035924 fit vehicles with bucket seats or captain's chairs?
No. This kit is designed exclusively for GM trucks and SUVs equipped with split bench front seating. Vehicles with bucket seats or captain's chairs use a different console configuration and require a different replacement kit.
Will this kit fit a 2008 or newer Silverado or Sierra?
This kit fits 1999-2007 Silverado and Sierra models only, including 2007 Classic editions with split bench seating. The 2007.5 and later 'new body style' trucks use a different console design and are not compatible with this part.
What is the difference between APDTY 035924, 035923, and 035922?
All three kits use the same hinge and hardware. The only difference is lid color: 035924 is light gray, 035923 is tan, and 035922 is dark gray. Match your vehicle's interior color when ordering.
Does this kit include installation instructions?
Yes, the kit includes basic installation guidance. The replacement process is straightforward and mirrors the removal of the original assembly. If you need additional help, vehicle-specific repair manuals and online tutorials are available for most GM truck and SUV models.
The APDTY 035924 center console lid replacement kit is a durable, cost-effective solution for repairing the common hinge and armrest failures in 1999-2007 GM trucks and SUVs with split bench seating. By replacing both the lid and the brittle factory hinge in one kit, you restore both function and appearance without the need for expensive dealership parts or labor. Match the product image to your existing console, verify your vehicle's seating configuration, and order with confidence. For questions about fitment or installation, contact APDTY's customer support team or consult the live compatibility tool on the product page.