The APDTY 012185 Power Window Switch is a direct-replacement front right (passenger-side) window control switch designed for 2000-2005 Chevrolet Venture and 2000-2004 Oldsmobile Silhouette vans. This single-button switch restores power window operation when the original factory switch fails, eliminating stuck or non-responsive passenger-side windows. It replaces GM OE part numbers 10416106 and 19244642.
Key Takeaways
- Direct replacement for front right passenger-side power window switch in 2000-2005 Chevrolet Venture and 2000-2004 Oldsmobile Silhouette vans
- Replaces GM OE part numbers 10416106 and 19244642
- Single-button switch design matches original factory configuration
- Restores power window control when original switch wears out or fails
- Always verify exact fitment using the compatibility chart for your specific vehicle year and model

Buy APDTY 012185 directly from APDTY
What Does the Front Right Power Window Switch Do?
The front right power window switch controls the electric window motor on the passenger-side door. When you press the switch, it sends an electrical signal to the window regulator motor, which raises or lowers the glass. This switch is integrated into the door panel trim and is used by both the driver (via master switch panel) and the passenger (via local switch) to operate the passenger-side window.
In these GM minivans, the front right switch is a single-button design that typically allows one-touch operation. Over time, the electrical contacts inside the switch wear down from repeated use, leading to intermittent or complete loss of window control.
What Are the Symptoms of a Failed Power Window Switch?
When the front right power window switch fails, you may experience one or more of these symptoms:
- Window does not respond when you press the switch button
- Intermittent operation: window works sometimes but not others, often requiring multiple presses
- Window moves slowly or hesitates before responding to switch input
- No clicking sound from the switch when pressed, indicating no electrical contact
- Window stuck in up or down position with no control from the passenger-side switch
Before replacing the switch, verify that the window motor and regulator are functioning properly and that the vehicle's fuses and wiring are intact. A failed motor or regulator will produce similar symptoms but requires different repairs.
Which Vehicles Does APDTY 012185 Fit?
According to the verified product data, APDTY 012185 is compatible with the following vehicles:
| Year Range | Make | Model | Position |
|---|---|---|---|
| 2000-2005 | Chevrolet | Venture Van | Front Right (Passenger-Side) |
| 2000-2004 | Oldsmobile | Silhouette Van | Front Right (Passenger-Side) |
Important: Always check the live compatibility chart on the product page to verify fitment for your specific vehicle year, make, and model before ordering. Vehicle production variations and trim levels may affect compatibility.
APDTY 012185 Specifications and Part Numbers
| APDTY Part Number | 012185 |
| Position | Front Right (Passenger-Side) |
| Switch Type | Single Button |
| Replaces OE Numbers | 10416106, 19244642 |
| Condition | Brand New |
| Fitment | 2000-2005 Chevrolet Venture, 2000-2004 Oldsmobile Silhouette |
This switch is manufactured to meet or exceed OE specifications and is designed as a direct plug-in replacement with no modifications required.
How Do You Replace a Front Right Power Window Switch?
Replacing the front right power window switch in these GM minivans is a straightforward DIY repair for most home mechanics. Here is a general overview of the replacement process:
- Disconnect the battery: For safety, disconnect the negative battery cable before beginning any electrical work.
- Remove the door panel: Remove screws and clips securing the passenger-side door panel. Gently pry the panel away from the door frame, disconnecting any electrical connectors as you go.
- Access the switch: Locate the power window switch assembly mounted in the door panel trim.
- Disconnect the old switch: Unplug the electrical connector from the back of the failed switch. Depending on design, the switch may be clipped or screwed into the panel.
- Install the new switch: Plug the electrical connector into the APDTY 012185 switch and secure it into the door panel housing.
- Test operation: Reconnect the battery and test the window operation before fully reassembling the door panel.
- Reinstall the door panel: Snap or screw the door panel back into place, ensuring all clips and fasteners are secure.
Consult a factory service manual or online repair guide specific to your vehicle for detailed torque specs, clip locations, and safety precautions.
Frequently asked questions
Does APDTY 012185 fit both the driver and passenger side?
No. APDTY 012185 is designed specifically for the front right (passenger-side) position. A different part number is required for the driver-side switch.
Will this switch work if my window motor is bad?
No. If the window motor or regulator has failed, replacing the switch will not restore operation. Test the motor and wiring before replacing the switch to confirm the switch is the failed component.
What OE part numbers does APDTY 012185 replace?
APDTY 012185 replaces GM OE part numbers 10416106 and 19244642. Check your existing switch or consult your vehicle's parts manual to confirm compatibility.
Do I need any special tools to replace this switch?
Most replacements require only basic hand tools such as screwdrivers, trim panel removal tools, and a socket set. Always disconnect the battery before beginning electrical work.
A failed power window switch is a common issue in high-mileage GM minivans, and the APDTY 012185 offers a direct, cost-effective solution for restoring passenger-side window control in 2000-2005 Chevrolet Venture and 2000-2004 Oldsmobile Silhouette vans. With straightforward installation and OE-quality construction, this switch gets your windows working again without a trip to the dealer. Always verify fitment using the compatibility chart, and inspect your window motor and wiring before replacing the switch to ensure accurate diagnosis.
