Here is another great set of instructions for the do-it-yourselfers out there. These instructions came from a 1992 Dodge Caravan, however, they will work on Caravan, Voyager, Grand Voyager, Grand caravan, and many other Chrysler products. This hub and bearing assembly is being used on certain Caravan, Voyager and Mini Ram Vans. This unit is serviced as a complete assembly and is attached to the steering knuckle by four mounting screws that are removed from the rear of the knuckle assembly. Removal: Remove cotter pin, nut lock, and spring washer. Loosen hub nut while the vehicle is on the floor with...

Here is a great set of instructions for the installation of a GM front wheel hub bearing assembly. One of our customers submitted this for us to show to the public. Hopefully, anyone thinking about tackling this job will find these helpful. These instructions came from a 2002 Buick Lesabre Limited. However, they will work for numerous GM front wheel drive vehicles including: Buick Lesabre, Park Avenue, Century, Regal, Riviera, Rendezvous, Cadillac Concours, Seville, Deville, Eldorado Chevrolet Impala, Monte Carlo, Venture Oldsmobile Aurora, Intrigue, Silhouette, Pontiac Aztec, Bonneville, Grand Prix, Montanna, Transport 1. Remove hub cap/dust cover. Tip: If you do not have an...

Here is another great set of do-it-yourself instructions submitted by one of our customers. These will work for many Chevrolet and GMC 4×4 Pickups including: GMC Yukon, Denali, Sierra, Tahoe, Z71, Suburban, Silverado, Escalade, Avalanche, Savanna, and Chevy Express.These came specifically from a:2003 Chevy Silverado 4×41. Using a 22mm socket, by hand, remove hubcap from the wheel.2. Lift the vehicle with jack and support properly.3. Using 22mm socket or vehicle lug wrench, remove lug nuts, remove the wheel and set aside.4. Using a T55 Torx socket, remove the 2 caliper bolts. Set caliper aside. Do not let the caliper hang...

Here is a great set of instructions submitted to us from one of our customers. These are very detailed and give you great insight into tackling this very easy job. You may also call our team of ASE certified technicians with questions at 1-866-770-2771.New Front Wheel Hub Bearing Assembly fits 2WD with ABS. Fitment for the following vehicles: 1998-2005 GMC S15 Jimmy 2WD w/ABS 1998-2005 Chevy S10 Blazer 2WD w/ABS ZR2 models are different, we do have them, please call us at 1-866-770-2771 and we can post a listing for you.Instructions for replacing a front hub assembly on a 2001...

We found these instructions online and posted them here hoping they will help. We are not the author of these instructions and we do not claim that these will be exact to your vehicle; however, they should give you a very good idea if you think you want to tackle this job yourself or not. Description: The front hub/bearing assembly on an NA model Miata is a one-piece unit consisting of the hub/lugs with the bearings pre-installed and greased. The assembly is typically considered non-serviceable, and you replace the unit when the bearings fail.Symptoms: In my case, my 1990 Miata...